Congratulations on your investment!

Changing a few habits with your car washing routine will preserve the luster, gloss and protection of your Ceramic Coating, Paint Correction or SiO2 Sealant / Wax. 

Here are some basic guidelines :

Do not wash your vehicle for 14 days after your vehicle has been Ceramic Coated.

NEVER use an automated car wash ! The combination of rotating brushes and harsh chemicals will damage the vehicle finish. Remember that Ceramic Coatings are NOT indestructible and they offer minimum scratch protection. 

Never let any repair facility, dealership or mechanic perform a courtesy wash. 

Clean Wheels

Wash wheels 1st and discard wash solution. Rinse buckets thoroughly. Use separate wash mitt for wheels. 

Pre-Soak

We like to Pre Soak prior to washing the vehicle. This helps dislodge dirt and reduce the chance of marring your paint.

 Fill your foam cannon according to instructions. Spray Foam your vehicle, remember to avoid washing in direct sunlight. Let dwell for a few minutes.

Perform 2 Bucket Wash

Practice a 2 bucket car wash. Bucket 1 is the clear water rinse bucket.  Bucket 2 is the wash bucket. Rinse vehicle if you aren't using a pre-soak.  Submerge microfiber wash mitt in bucket 2, clean one panel at a time in long straight passes, NO CIRCULAR washing motions. Vigorously rinse mitt in bucket 1. Then submerge in bucket 2 and move onto next panel. Avoid washing the vehicle in direct sun. Do not allow wash mixture dry on vehicle. Always rinse top to bottom. 

Dry Your Vehicle

Once you've completed washing the vehicle, immediately dry with a quality microfiber drying towel. NEVER allow your vehicle to drip dry. Water spots WILL form if you let household water dry on your vehicle. 

Use A Detail Spray

Once every 3 months, use a ceramic detail spray.  This step isn't required, but it will help lengthen the lifespan of your Ceramic Coat. Mist product on clean microfiber towel. Wipe down panel with light pressure. Buff panel with a second clean microfiber towel.

Schedule Your Ceramic Booster

Once every 6-12 months, schedule a Ceramic Booster service. Your vehicle is decontaminated with an iron remover then decontaminated with a clay bar treatment. This is followed up with the application of a ceramic booster product. This service will keep your vehicle looking it's best and promote enhanced hydrophobic qualities. 

Read the directions on any products suggested. Some may require to be diluted. 

We are available if you have questions or concerns regarding maintaining your vehicle's finish.

Here are some products that i recommend to help maintain your vehicle.